awjilo.blogg.se

Huntr fans three blade
Huntr fans three blade












  1. #Huntr fans three blade how to#
  2. #Huntr fans three blade install#
  3. #Huntr fans three blade full#

If there is not an adequate ceiling joist available, do the following: If there is a ceiling joist directly above the hole which will allow the outlet box to be recessed a minimum of 1/16" in the ceiling, go to installing the outlet box section.

#Huntr fans three blade install#

You will use the hole to install the support brace and outlet box. Locate the site for the hole directly below the joist or support brace that will hold the outlet box and fan.Ĭut a 4" diameter hole through the drywall or plaster of the ceiling as shown in Figure 6. Installing the Support Brace (if necessary).To prepare the fan site follow four steps: If your existing fan site is suitable, go to the installing the ceiling plate section and begin installing your new Hunter fan. See Figure 5 for an adequate existing fan site. Six inches of lead wires extend from outlet box.Electrical cable secured to outlet box by approved connector.Bottom of outlet box recessed a minimum of 1/16" into ceiling.Outer holes of outlet box aligned with joist or support brace.Outlet box secured to joist or support brace by wood screws and washers through inner holes of outlet box.UL-approved octagonal 4" x 1-1/2" outlet box (or as specified by the support brace manufacturer).Outlet box clearance hole directly below the joist or support brace.

#Huntr fans three blade full#

  • Fan support system must hold full weight of fan and light kit.
  • Fan must attach directly to building structure.
  • If you cannot check off every item, see the preparing a new fan site section for instructions on properly preparing the site for your new fan. If you plan to use an existing fan site, complete the following checklist for the support brace, ceiling hole, outlet box, and wiring. If you are preparing a new fan site, go to the preparing a new fan site section.
  • See Figure 4 for the minimum mounting distances.
  • The fan is directly below a joist or support brace that will hold the outlet box and the full weight of the fan.
  • The fan blades have no obstructions to air flow, such as walls or posts, within 30 inches of the fan blade.
  • The fan blades are at least 7 feet above the floor and the ceiling is at least 8 feet high.
  • No object can come in contact with the rotating fan blades during normal operation.
  • Within the room where you want to install the fan, choose a fan site where: Proper ceiling fan location and attachment to the building structure are essential for safety, reliable operation, maximum efficiency, and energy savings. These guidelines are designed to help you select the best location for your fan and to prepare the site prior to installing the fan.

    huntr fans three blade

    All Hunter fans use sturdy 3/4" diameter pipe to assure stability and wobble-free performance.Īngle Mounting (Figure 3) hangs from a vaulted or angled ceiling. For ceilings higher than 8 feet, you can purchase Hunter extension Down Rods. Standard Mounting (Figure 2) hangs from the ceiling by a downrod (included), for ceilings 8 feet or higher. Flush Mounting (Figure 1) fits close to the ceiling, for low ceilings less than 8 feet high. The steps in this guide include instructions for all three Installer's Choice mounting methods. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angle mounting. Hunter's patented 3-position mounting system provides you maximum installation flexibility and ease. If any parts are missing or damaged please contact Hunter at 88.

  • Ladder (height dependent upon installation site)Ĭarefully unpack your Hunter fan and check for damaged or missing parts.
  • If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician.
  • Drill holes for and install wood screws.
  • Locate the ceiling joist or other suitable support in ceiling.
  • To install a Hunter ceiling fan, be sure you can do the following:

    #Huntr fans three blade how to#

    « Back to Fan Guides How To Install Your Ceiling Fan Hunter Fan Installation Instructions














    Huntr fans three blade